Once the Upper Pool was turned into a gravel garden, Mark could seriously begin work on deconstructing the big pond. It was a complex project that was made easier by the fact that Mark designed the pond himself and was an integral part of the construction team. Here is a brief description of how the pond was built, which will make it easier to understand how Mark took it apart this summer.
. . .
Mark did numerous drawings for himself and also to explain to me how everything would work when we originally built the pond. The first two images picture the slope behind the pond with the rocks, pond wall and "shelves" for water plants. (Double click to enlarge images).
This is the view from above with the pond wall, boulders, the shallow pebble beach (at the bottom of the drawing) and the shelves where we set potted water plants like lilies.
In order for the John Deere trackhoe to make it into the back garden, Mark took down a 40-year-old Arborvitae tree. Its matching partner is still growing at the other end of our house. This was a huge project in itself and much more work than I think Mark anticipated.
The equipment just fit between our house and our neighbor's fence to the left.
Here we are at the end of the first day standing in the rough hole which will become the pond. We were so freaked at the mess and so nervous about the whole project we went out to dinner so we didn't have to look at this view. I told Mark if we decided we'd made a big mistake, it was only a hole in the ground and we could always fill it back up. Obviously that's exactly what we're doing — 24 years later!
Large boulders have been set on the hill and the retaining wall has been started. The cement blocks are being used to built the pond retaining wall. The big pile of them are at the foot of what will be the stream to the upper pool. The wheelbarrow is standing on the first "shelf" layer.
It was a very rainy summer which kept putting us behind schedule waiting for the pond to dry out.
We sodded the hills to control erosion during the rainstorms and put down wood chips on the path between them. At this point, the pond has been lined with two different colors of old carpet to protect the rubber liner from being punctured by tree roots.
The pond was double-lined with EPDM roofing rubber. Mark talked to an engineer at the production company to be sure it was fish safe. The roll of rubber weighed over 500 pounds and took 14 friends, relatives and neighbors to lift it and spread it in place.
Setting the big rocks inside the pond.
An early photo of the finished pond and early plantings.
A view from a year or two ago before I started replanting the hills with native Carex pennsylvanica to replace the weedy dying grass that had been shaded out over the years.
We eventually gave up on having fish as they drew raccoons to the pond and the raccoons, in turn, tended to mess with the potted water plants.
The real losers in our redesign project are Fred and Ethel. They — or their progeny — have come to the pond every spring since 1998. They usually were gone by the 4th of July, but they were an annual treat for us. We loved their antics in and out of the water. When they arrived on March 21st this year, we told them about our plans, but I don't think they believed we were serious.
We're very happy with our big change in the garden, but we will miss this duo.
